Installation variant B

Step 4 of 4

Step 4

Set up display

Put on your helmet as usual. Attach the head-up display to the helmet adapter with the magnets and fold the display down at a 45° angle. The display should now be clearly visible in front of your right eye.

Set display correctly

Press the control button on the head-up display module to turn on the device.

Check that you can see the entire display clearly without changing the position of the helmet on your head. To do this, look ahead as you would in traffic. If the display is blurred or not easy to read, you can slightly change the angle of the display.

Note

You can display the frame for orientation during alignment at any time. To do so, activate the "Alignment mode" in the "Settings" app menu.

Readjust display if necessary

If the frame on the display is partially or completely out of your field of view, remove the head-up display module and the helmet adapter from the helmet and move the helmet adapter slightly in the desired direction. Adjust the position of the helmet adapter until all conditions mentioned on this page are met.

Done!

You have successfully installed the helmet adapter in your helmet. You will now be guided through the next steps in your app.

Register now for the newsletter

Don't miss any more news and promotions and subscribe to our newsletter today.