Step by step guide

Installation variant D

For installation variant D you need:

Flat helmet adapter

TILSBERK Head-Up Display


Sugru moldable all-purpose adhesive

For which helmets is installation variant D suitable?

Installation variant D is used for helmets with sun visors, which have a complex geometry on the mounting surface.

Note 1 of 2

Sugru information

Adhesive properties: Sugru hardly needs any processing to develop adhesive properties. The adhesive effect develops through the reaction of the material with the ambient air. After opening the package, you have 30 minutes to work with Sugru. Sugru requires 24 to 48 hours to fully cure and develop its maximum holding power. The exact time depends on the thickness of the layer and the temperature and humidity of the surrounding air.

Skin contact: Sugru is not irritating to the skin. If allergic reactions occur upon skin contact, rinse skin with warm water. Follow the manufacturer's instructions.

Note 2 of 2

Before installation

For secure mounting, all adhesive surfaces must be clean, dry, and free of dust and grease. Therefore, please clean all smooth surfaces thoroughly with an alcohol-based cleaner such as spirit or rubbing alcohol before mounting. Adhesion is better on surfaces made of fabric - nevertheless, these surfaces should also be cleaned.

Once you've read all the instructions and placed the required parts in front of you, you're ready to go.

Register now for the newsletter

Don't miss any more news and promotions and subscribe to our newsletter today.